[{"data":1,"prerenderedAt":65},["ShallowReactive",2],{"blog-pcb-aoi-feature-visibility-layout-en":3},{"title":4,"description":5,"date":6,"lastUpdated":6,"category":7,"image":8,"imageAlt":9,"readingTime":10,"wordCount":11,"timeRequired":12,"htmlContent":13,"faq":14,"tags":30,"slug":34,"sourceLocale":35,"availableLocales":36,"jsonld":41},"PCB Layout for AOI: Review Feature Visibility","Review PCB features for AOI visibility before design release, identify potential obstructions and agree on validation or alternatives with the assembler.","2026-11-13","design","/assets/img/blogs/2026/11/pcb-aoi-feature-visibility-layout.svg","Conceptual side view of a PCB joint with one sight line blocked by a neighboring component and another passing above it",12,2389,"PT12M","\u003Cp>Before freezing a PCB layout, review each inspection-critical feature against the \u003Cstrong>actual assembly and inspection plan\u003C/strong>. For every exposed joint, component feature or marking, identify the intended defect or identification check, locate possible obstructions, and agree with the assembler on one of three outcomes: \u003Cstrong>change the layout, validate another inspection method, or document an accepted limitation\u003C/strong>.\u003C/p>\n\u003Cp>A clear view in CAD is useful as a risk-screening result. It is not proof that an AOI system can image the feature, that a usable inspection recipe exists, that a specified defect can be detected, or that the product is acceptable.\u003C/p>\n\u003Cp>For the underlying inspection process, see \u003Ca href=\"/en/blog/aoi-automated-optical-inspection/\">AOI basics\u003C/a>. For evidence produced after inspection, see the \u003Ca href=\"/en/blog/pcb-assembly-inspection-report/\">PCB assembly inspection report\u003C/a>. Review visibility before design freeze, when a layout change may still be easier than accommodating an obstruction in production.\u003C/p>\n\u003Ch2>Define the feature before judging visibility\u003C/h2>\n\u003Cp>“Inspect R12” is too broad for a layout review. R12 may have two terminations, each with a different view of the surrounding components. A reviewer should identify the \u003Cstrong>particular feature and intended check\u003C/strong>, such as the outboard solder joint at one end of R12, or the polarity marking on a diode body.\u003C/p>\n\u003Cp>For each feature, the design owner and assembler should review:\u003C/p>\n\u003Cul>\n\u003Cli>\u003Cstrong>Target:\u003C/strong> Reference designator, board revision and side, package, and the specific joint, body feature or marking.\u003C/li>\n\u003Cli>\u003Cstrong>Intended observation:\u003C/strong> The defect or identification condition to be assessed. A readable marking, for example, is not by itself proof that the component is electrically correct.\u003C/li>\n\u003Cli>\u003Cstrong>Obstructions:\u003C/strong> Nearby components, connectors, shields, board edges, panel rails and any other geometry present at the inspection stage.\u003C/li>\n\u003Cli>\u003Cstrong>Geometry:\u003C/strong> Target position and height, adjacent component outlines and heights, orientation, and the directions from which a view might approach the feature.\u003C/li>\n\u003Cli>\u003Cstrong>Stage:\u003C/strong> What is installed, soldered or obscured when inspection is planned.\u003C/li>\n\u003Cli>\u003Cstrong>System configuration:\u003C/strong> The actual assembler’s model, fitted options, lighting, available view directions, resolution and programming approach—or an explicit statement that these are not yet known.\u003C/li>\n\u003C/ul>\n\u003Cp>A component courtyard or package outline can flag proximity, but neither describes every relevant optical surface. Use appropriate package and assembly data, including the expected installed orientation. If a shield is fitted after an AOI station, for example, it may not obstruct that station; if inspection occurs after the shield is installed, the decision can be different.\u003C/p>\n\u003Ch2>Use a per-feature decision matrix\u003C/h2>\n\u003Cp>The following is a \u003Cstrong>hypothetical design-review example\u003C/strong>, not a report of inspections performed or capabilities offered by a factory. Board A is a fictional top-side assembly. Its assembler and actual AOI configuration have not yet been selected. All dimensions are illustrative.\u003C/p>\n\u003Ctable>\n\u003Cthead>\n\u003Ctr>\n\u003Cth>Target and intended check\u003C/th>\n\u003Cth>Nearby geometry and planned stage\u003C/th>\n\u003Cth>Freeze decision and needed evidence\u003C/th>\n\u003Cth>State\u003C/th>\n\u003C/tr>\n\u003C/thead>\n\u003Ctbody>\u003Ctr>\n\u003Ctd>\u003Cstrong>R12, east solder joint:\u003C/strong> assess a specified joint defect after reflow.\u003C/td>\n\u003Ctd>Joint target is modeled 0.2 mm above the board. A neighboring connector body begins 2.0 mm away and is 1.2 mm high. Top-side post-reflow AOI is proposed.\u003C/td>\n\u003Ctd>Flag the connector-side view. Obtain the actual system configuration and test an appropriate recipe and representative defect condition. The simplified geometry below helps explain the risk, but does not resolve it.\u003C/td>\n\u003Ctd>\u003Cstrong>pending\u003C/strong>\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>\u003Cstrong>D4, polarity mark:\u003C/strong> distinguish the intended installed orientation.\u003C/td>\n\u003Ctd>The mark faces a taller adjacent component. Inspection is proposed after placement or reflow, before any cover is fitted.\u003C/td>\n\u003Ctd>In this hypothetical revision, rotate D4 so the mark faces a less obstructed direction, subject to electrical and assembly constraints. Confirm the mark is readable and that the recipe checks the intended orientation on the actual setup.\u003C/td>\n\u003Ctd>\u003Cstrong>layout-changed-awaiting-validation\u003C/strong>\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>\u003Cstrong>U3, exposed perimeter joint:\u003C/strong> assess a specified solder-joint condition.\u003C/td>\n\u003Ctd>A nearby shield wall may be present. The inspection sequence relative to shield installation is not yet agreed.\u003C/td>\n\u003Ctd>Determine which stage offers an accessible view. If the shield is present, evaluate a layout or sequence change, or validate another method for the specified condition.\u003C/td>\n\u003Ctd>\u003Cstrong>pending\u003C/strong>\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>\u003Cstrong>U7, joint beneath an opaque package:\u003C/strong> assess a specified hidden-joint defect.\u003C/td>\n\u003Ctd>The joint is not optically exposed from above. Post-reflow inspection is proposed.\u003C/td>\n\u003Ctd>Do not treat AOI line of sight to the package body as a view of the joint. Assess X-ray or another suitable method for the particular defect and setup; obtain evidence before relying on it.\u003C/td>\n\u003Ctd>\u003Cstrong>pending\u003C/strong>\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>\u003Cstrong>J2, printed identification mark:\u003C/strong> read the specified mark.\u003C/td>\n\u003Ctd>A label or cable assembly may cover the mark later. The timing of both assembly and inspection is undecided.\u003C/td>\n\u003Ctd>Decide whether to move the mark, inspect before coverage, or propose a conditional exclusion. An exclusion remains pending until its scope, owner, consequences and required approval are recorded.\u003C/td>\n\u003Ctd>\u003Cstrong>pending\u003C/strong>\u003C/td>\n\u003C/tr>\n\u003C/tbody>\u003C/table>\n\u003Cp>The U7 row is a deliberate contrast with the exposed-feature reviews: an opaque package hides the joint. It shows why “the component is visible” cannot be substituted for “the joint is visible.”\u003C/p>\n\u003Ch3>Keep the states distinct\u003C/h3>\n\u003Cp>Use the following states consistently for each feature and intended check:\u003C/p>\n\u003Cul>\n\u003Cli>\u003Cstrong>pending\u003C/strong> — Geometry, stage, equipment, method, validation or approval is unresolved.\u003C/li>\n\u003Cli>\u003Cstrong>layout-changed-awaiting-validation\u003C/strong> — The design has been changed, but the revised feature has not yet been validated for the intended check.\u003C/li>\n\u003Cli>\u003Cstrong>validated on actual system with evidence\u003C/strong> — Relevant evidence exists for the specific feature, defect or marking, stage, board revision and actual system configuration.\u003C/li>\n\u003Cli>\u003Cstrong>conditionally excluded with owner and approval\u003C/strong> — The limitation is defined and accepted through the project’s approval process, with an owner and any agreed conditions or compensating controls recorded.\u003C/li>\n\u003C/ul>\n\u003Cp>The last two states should not be assigned merely because they appear in a design-review table. No row in the example claims an actual validation or an actual approval.\u003C/p>\n\u003Ch2>A simplified geometry illustration\u003C/h2>\n\u003Cp>For R12 in the fictional example, imagine a two-dimensional vertical slice through the target and connector. This is a \u003Cstrong>simplified model\u003C/strong>, not a machine clearance rule.\u003C/p>\n\u003Cp>Set the target point at horizontal position x = 0, at a height of 0.2 mm above the board reference plane. Model the connector as a block extending from x = 2.0 mm to x = 3.0 mm, with a top height of 1.2 mm. Consider a straight ray rising from the target toward a hypothetical camera beyond the block.\u003C/p>\n\u003Cp>At the connector’s near face, the ray height is:\u003C/p>\n\u003Cp>\u003Cstrong>Ray height in mm = 0.2 + 2.0 × tangent of the angle\u003C/strong>\u003C/p>\n\u003Cp>The angle is measured above the horizontal board plane.\u003C/p>\n\u003Cul>\n\u003Cli>At \u003Cstrong>20°\u003C/strong>, the ray height is approximately 0.2 + 0.728 = \u003Cstrong>0.928 mm\u003C/strong>. This is below the modeled 1.2 mm block top, so that ray intersects the block.\u003C/li>\n\u003Cli>At \u003Cstrong>30°\u003C/strong>, the ray height is approximately 0.2 + 1.155 = \u003Cstrong>1.355 mm\u003C/strong>. This is about 0.155 mm above the block top at its near face. Because the ray rises as it crosses the flat-topped block, it clears that block in this simplified slice.\u003C/li>\n\u003C/ul>\n\u003Cp>The calculation only compares two ideal rays with one ideal obstruction. It does not establish that either angle exists on the selected machine, that the whole joint is visible, or that the image has enough quality to detect the intended defect. Real packages, solder surfaces, tolerances, board curvature, other components and illumination can change the result.\u003C/p>\n\u003Cp>A useful CAD review may examine several plausible directions and more than one point on a target. Treat the result as a way to \u003Cstrong>prioritize questions and possible layout changes\u003C/strong>, not as an equipment specification.\u003C/p>\n\u003Ch2>Match the review to the actual inspection stage and system\u003C/h2>\n\u003Cp>The same layout can present different opportunities at different stages. Before reflow, a system may be asked to assess placement or an exposed marking. After reflow, the intended target may be a formed solder joint. A later cover, connector, label or second assembly operation may change what can be seen. Agree which stage is relevant to each feature rather than applying one board-wide assumption.\u003C/p>\n\u003Cp>Ask the assembler to identify the equipment configuration actually planned for the job. Relevant details can include available view directions, fitted cameras or other options, illumination, resolution, board handling and the proposed recipe. These details vary between systems and may also vary between machines of the same product family.\u003C/p>\n\u003Cp>For example, Yamaha’s YSi-V manufacturer documentation lists 3D height and slope inspection and a four-direction angular camera as options for that model. That is not evidence that a particular assembler has those options, or that they can inspect a particular joint. Confirm the installed configuration and the intended program for the job.\u003C/p>\n\u003Cp>Panelization and handling also matter. A rail, fixture, clamp or board edge may restrict a view or affect how the board is presented. Review the actual assembly drawing and planned inspection setup with the assembler, including whether a feature remains accessible after any rework or later installation step.\u003C/p>\n\u003Ch2>Choose the least speculative path to release\u003C/h2>\n\u003Ch3>Adjust the layout\u003C/h3>\n\u003Cp>A layout change can reduce the risk at its source. Depending on the design, candidates include moving or rotating a neighboring part, changing a component orientation, relocating a marking, or changing where a shield is installed. Each change needs its normal electrical, mechanical, thermal and assembly review; an improvement in optical access is not a reason to overlook another constraint.\u003C/p>\n\u003Cp>After a change, update the board revision and review the new geometry. The state remains \u003Cstrong>layout-changed-awaiting-validation\u003C/strong> until the intended inspection is demonstrated on the actual setup.\u003C/p>\n\u003Ch3>Validate an alternative\u003C/h3>\n\u003Cp>If changing the layout is impractical, agree on an alternative method for the \u003Cstrong>specific defect or marking\u003C/strong>. This might involve a different inspection stage, another optical approach, X-ray or a suitable non-optical test.\u003C/p>\n\u003Cp>Do not assume that X-ray detects every hidden-joint defect, or that an electrical test proves a joint’s long-term reliability. For the proposed method, define what it is expected to reveal, the setup and acceptance criteria, and how representative conditions will be checked. If the method cannot address the original concern, record the remaining limitation rather than describing it as equivalent coverage.\u003C/p>\n\u003Ch3>Record an accepted limitation\u003C/h3>\n\u003Cp>A feature can be conditionally excluded when the relevant parties understand and approve the scope. Identify the exact feature and check excluded, why it cannot be covered as planned, the owner, any compensating control and the decision authority. State any restrictions on the board revision, process or product use.\u003C/p>\n\u003Cp>An exclusion is not an inspection pass and does not waive applicable customer, contractual or regulatory requirements. If the necessary approval is absent, keep the item pending. The design owner and assembler should agree how the limitation reaches the person or team responsible for product release.\u003C/p>\n\u003Ch2>Validate the intended check, not just the picture\u003C/h2>\n\u003Cp>A useful validation sequence separates several different claims:\u003C/p>\n\u003Col>\n\u003Cli>\u003Cstrong>Geometry screening:\u003C/strong> CAD and assembly data suggest whether the target may be obstructed.\u003C/li>\n\u003Cli>\u003Cstrong>Imaging:\u003C/strong> The actual system and setup produce an image in which the relevant feature can be assessed.\u003C/li>\n\u003Cli>\u003Cstrong>Recipe validation:\u003C/strong> A program is configured for the feature and intended condition, with appropriate criteria.\u003C/li>\n\u003Cli>\u003Cstrong>Defect or marking validation:\u003C/strong> The agreed evidence demonstrates performance against relevant, representative conditions for that check.\u003C/li>\n\u003Cli>\u003Cstrong>Production inspection and acceptance:\u003C/strong> Production units are inspected, results are reviewed, and product acceptance follows the applicable process.\u003C/li>\n\u003C/ol>\n\u003Cp>Progress at one step does not automatically establish the next. A sharp image can still be unsuitable for a particular defect decision. A recipe can also change with board revision, component source, lighting, equipment configuration or inspection stage.\u003C/p>\n\u003Cp>Agree in advance on appropriate reference samples or other ground truth, how results will be reviewed, and what evidence is sufficient for the project. A limited validation provides evidence within its tested scope; it is not a guarantee that every future defect will be found.\u003C/p>\n\u003Cdiv data-component=\"BlogQuickQuoteInline\">\u003C/div>\n\n\u003Ch2>Hand off the open decisions at design release\u003C/h2>\n\u003Cp>The design owner should give the assembler a controlled package that connects layout intent to the planned inspection. Include the board and assembly revisions, CAD or drawings, relevant package and height information, panel and fixture assumptions, and the assembly sequence used in the review.\u003C/p>\n\u003Cp>Alongside those files, hand over the per-feature matrix with:\u003C/p>\n\u003Cul>\n\u003Cli>The exact target, intended defect or marking check, board side and stage.\u003C/li>\n\u003Cli>The obstruction and the geometry or configuration assumptions behind the decision.\u003C/li>\n\u003Cli>The actual equipment and options, if confirmed; otherwise, an explicit unknown.\u003C/li>\n\u003Cli>The selected path: layout change, alternative method or proposed limitation.\u003C/li>\n\u003Cli>The current state, responsible owner, outstanding action and evidence or approval reference.\u003C/li>\n\u003C/ul>\n\u003Cp>The assembler should review the proposed checks against its actual production setup and identify unresolved programming or access issues. The design owner remains responsible for the design decisions and for obtaining the project’s required approvals. Together, they should resolve or formally disposition open items before the relevant release gate.\u003C/p>\n\u003Cp>This handoff does not replace production inspection records. Nor does a successful inspection recipe replace final product qualification. Those are separate activities, with their own evidence and decision authorities. For an early \u003Ca href=\"/en/products/pcb-assembly/\">PCB assembly\u003C/a> discussion, share the controlled design package and open visibility questions through \u003Ca href=\"/en/quote/\">the quote request\u003C/a>.\u003C/p>\n\u003C!-- faq:start -->\n\n\u003Ch2>FAQ\u003C/h2>\n\u003Ch3>Does a clear CAD view mean AOI will detect a defect?\u003C/h3>\n\u003Cp>No. CAD can flag whether a geometric path appears blocked. Actual imaging, lighting, resolution, recipe settings and evidence for the specified defect must be assessed on the planned system.\u003C/p>\n\u003Ch3>Should every nearby tall component trigger a layout change?\u003C/h3>\n\u003Cp>Not automatically. Review its position and height relative to the particular target, the inspection stage and the available system views. Change the layout when the risk warrants it and the change is compatible with the rest of the design.\u003C/p>\n\u003Ch3>Can AOI inspect a joint beneath an opaque package?\u003C/h3>\n\u003Cp>An optical view cannot pass through an opaque package to reveal the hidden joint. Consider X-ray or another method only after defining the defect of interest and validating the proposed setup for it.\u003C/p>\n\u003Ch3>What if the assembler’s equipment is not known at design freeze?\u003C/h3>\n\u003Cp>Keep equipment-dependent claims pending. Share the target list and geometry risks, then agree whether to change the layout conservatively, validate a method once the setup is known, or seek approval for a defined limitation.\u003C/p>\n\u003Ch3>Who approves a visibility limitation?\u003C/h3>\n\u003Cp>The project’s designated decision authority must approve it, with an identified owner. The design owner and assembler should share the technical review, while actual production inspection and final product qualification remain separate responsibilities.\u003C/p>\n\u003C!-- faq:end -->\n\u003Csection class=\"related-links\" aria-label=\"Related\">\u003Ch3>Related links\u003C/h3>\u003Cul>\u003Cli>\u003Ca href=\"/en/blog/aoi-automated-optical-inspection/\">What Is AOI (Automated Optical Inspection)? How AOI Works on PCBs, 2D vs. 3D, and Defect Detection\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/blog/pcb-assembly-inspection-report/\">PCB Assembly Inspection Report Format: Template and Checklist\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/products/pcb-assembly/\">PCB assembly\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/quote/\">the quote request\u003C/a>\u003C/li>\u003C/ul>\u003C/section>",[15,18,21,24,27],{"question":16,"answer":17,"answerText":17},"Does a clear CAD view mean AOI will detect a defect?","No. CAD can flag whether a geometric path appears blocked. Actual imaging, lighting, resolution, recipe settings and evidence for the specified defect must be assessed on the planned system.",{"question":19,"answer":20,"answerText":20},"Should every nearby tall component trigger a layout change?","Not automatically. Review its position and height relative to the particular target, the inspection stage and the available system views. Change the layout when the risk warrants it and the change is compatible with the rest of the design.",{"question":22,"answer":23,"answerText":23},"Can AOI inspect a joint beneath an opaque package?","An optical view cannot pass through an opaque package to reveal the hidden joint. Consider X-ray or another method only after defining the defect of interest and validating the proposed setup for it.",{"question":25,"answer":26,"answerText":26},"What if the assembler’s equipment is not known at design freeze?","Keep equipment-dependent claims pending. Share the target list and geometry risks, then agree whether to change the layout conservatively, validate a method once the setup is known, or seek approval for a defined limitation.",{"question":28,"answer":29,"answerText":29},"Who approves a visibility limitation?","The project’s designated decision authority must approve it, with an identified owner. The design owner and assembler should share the technical review, while actual production inspection and final product qualification remain separate responsibilities.",[31,32,33],"design for inspection","AOI","PCB layout","pcb-aoi-feature-visibility-layout","en",[35,37,38,39,40],"de","cn","fr","ru",{"blog":42,"breadcrumb":51},{"@context":43,"@type":44,"headline":4,"description":5,"image":8,"url":45,"datePublished":6,"dateModified":6,"timeRequired":12,"keywords":46,"articleSection":7,"author":47,"publisher":50},"https://schema.org","BlogPosting","https://hilpcb.com/en/blog/pcb-aoi-feature-visibility-layout/","design for inspection, AOI, PCB layout",{"@type":48,"name":49},"Organization","HILPCB",{"@type":48,"name":49},{"@context":43,"@type":52,"itemListElement":53},"BreadcrumbList",[54,59,63],{"@type":55,"position":56,"name":57,"item":58},"ListItem",1,"Home","https://hilpcb.com/",{"@type":55,"position":60,"name":61,"item":62},2,"Blog","https://hilpcb.com/en/blog/",{"@type":55,"position":64,"name":34,"item":45},3,1795146062538]