[{"data":1,"prerenderedAt":65},["ShallowReactive",2],{"blog-pcb-soldering-thermal-exposure-ledger-en":3},{"title":4,"description":5,"date":6,"lastUpdated":6,"category":7,"image":8,"imageAlt":9,"readingTime":10,"wordCount":11,"timeRequired":12,"htmlContent":13,"faq":14,"tags":30,"slug":34,"sourceLocale":35,"availableLocales":36,"jsonld":41},"PCB Soldering Thermal Exposure Ledger","Record PCB assembly and rework heat exposure by board and component, then assess missing history and evidence before approving the next soldering operation.","2026-11-11","assembly","/assets/blogs/pcb-soldering-thermal-exposure-ledger/thermal-exposure-cover.svg","Illustration of a populated circuit board beside a record of separate heating events",12,2360,"PT12M","\u003Cp>The question before another soldering operation is not simply, “How many times has this board been heated?” It is: \u003Cstrong>What has this particular assembly experienced, what will the next operation expose, and what evidence supports releasing it?\u003C/strong>\u003C/p>\n\u003Cp>A useful ledger follows the board from fabrication through assembly and repair. It records whole-board and local events without pretending they are interchangeable. It also preserves uncertainty: a missing repair record is not evidence that no repair occurred.\u003C/p>\n\u003Cp>The ledger is a decision aid, not a lifetime model. An event count, highest recorded temperature or summary of time above a threshold can help reviewers navigate the history. None independently establishes remaining life or authorizes another heat operation.\u003C/p>\n\u003Ch2>Start with identity and construction\u003C/h2>\n\u003Cp>Create the record before assembly, then carry it with the board serial number or another controlled identifier. Include the bare-board part number and revision, fabrication lot, assembly revision, customer or project, and links to applicable drawings and acceptance criteria.\u003C/p>\n\u003Cp>Identify the construction as specifically as available: laminate and prepreg designations, layer structure, thickness, plated-hole and via features, copper construction, surface finish and relevant fabrication records. “FR-4” or a glass-transition temperature alone is not enough to establish resistance to repeated soldering. Resin chemistry, decomposition behavior, expansion through the thickness, moisture, construction and plated features also matter.\u003C/p>\n\u003Cp>Name the components whose restrictions may govern a later operation. Package construction, maximum process temperatures, permitted handling conditions and prior component heating can differ from the board’s constraints. A replacement package may have a different history from the assembly it joins.\u003C/p>\n\u003Ch3>Use material data for its intended purpose\u003C/h3>\n\u003Cp>Isola describes its 370HR laminate and prepreg system as “multiple reflow capable” on its product page. This is product-specific evidence—not a guarantee for an unspecified FR-4 board or a finished assembly.\u003C/p>\n\u003Cp>The Isola 370HR laminate/prepreg data sheet lists typical time-to-delamination results by TMA for copper-removed material: T260 of 60 minutes and T288 of 30 minutes, using IPC-TM-650 2.4.24.1. These are typical material test results, not guaranteed minimums or permitted finished-board reflow counts. Dividing a reported test time by a production profile’s dwell time does not produce an allowance for separate heating cycles.\u003C/p>\n\u003Cp>The Isola 370HR processing guide addresses prepreg storage and handling and fabrication conditions as starting points that require fabricator adjustment and verification. It also discusses finished-board drying, packaging and moisture protection. Do not apply prepreg storage requirements to finished boards or components; use the documentation applicable to each.\u003C/p>\n\u003Cp>Document markings can differ between the file footer and revision history. Confirm the applicable versions and controlling documents for the order with the material supplier.\u003C/p>\n\u003Ch2>Keep the stages separate\u003C/h2>\n\u003Cp>Different stages can affect different portions of a product, at different temperatures and rates. Give each meaningful event its own entry.\u003C/p>\n\u003Cul>\n\u003Cli>\u003Cstrong>Fabrication and bare-board finishing:\u003C/strong> Record known lamination and cure history, finish, and any fabrication operation involving significant heat. Fabrication history can influence later behavior, but a lamination cure is not automatically a soldering reflow. If the exact finishing history is unavailable, mark it unknown.\u003C/li>\n\u003Cli>\u003Cstrong>Whole-board reflow:\u003C/strong> Record side A and side B as separate events. Identify the profiled locations and whether the trace represents the actual assembly or a representative setup. A furnace recipe alone is not a measured board profile.\u003C/li>\n\u003Cli>\u003Cstrong>Wave or selective soldering:\u003C/strong> Record the operation, exposed region, orientation, relevant preheat and contact conditions, and available measured evidence. Selective soldering can expose a limited area even though preheat affects a larger area.\u003C/li>\n\u003Cli>\u003Cstrong>Local rework:\u003C/strong> Separate touch-up, component removal, pad cleanup and replacement when they are distinct operations. Record tool, location, heating evidence and cooling conditions. Nearby packages and the opposite side may also be affected.\u003C/li>\n\u003Cli>\u003Cstrong>Off-board component work:\u003C/strong> If a removed component is reballed or otherwise heated away from the board, attach that event to the component’s identity. Do not represent it as board heating. If that component is later installed, link its history to the assembly.\u003C/li>\n\u003C/ul>\n\u003Cp>Do not convert these events into one another with a universal factor. A local removal and an oven pass differ in spatial exposure, thermal gradients and affected components; even two oven passes may not have the same profile.\u003C/p>\n\u003Ch2>Record what was measured—and where\u003C/h2>\n\u003Cp>For each event, capture the date, operator or responsible process, affected region, equipment and recipe, and a reference to the raw trace or other evidence. Where a profile is available, record:\u003C/p>\n\u003Cul>\n\u003Cli>Sensor type, placement and attachment method.\u003C/li>\n\u003Cli>Measured peak and time above a \u003Cstrong>declared\u003C/strong> threshold.\u003C/li>\n\u003Cli>Heating and cooling behavior, or a link to the trace that shows them.\u003C/li>\n\u003Cli>Whether the measurement was on the actual assembly, a representative board or a test coupon.\u003C/li>\n\u003Cli>Deviations, interruptions and the basis for accepting the process.\u003C/li>\n\u003C/ul>\n\u003Cp>A thermocouple near a package reports temperature at that measurement point. It does not automatically report the package junction, every solder joint, the laminate interior or the hottest via. Likewise, an oven setpoint, tool setting or solder-bath setting is not proof of the temperature experienced by a particular feature.\u003C/p>\n\u003Cp>For choosing and verifying a measurement point, see \u003Ca href=\"/en/blog/reflow-thermocouple-attachment-profiling/\">thermocouple attachment for reflow profiling\u003C/a>.\u003C/p>\n\u003Cp>Keep threshold summaries tied to their sensor and event. Do not add times from different thresholds, locations or processes as though they were a shared damage calculation.\u003C/p>\n\u003Ch2>A fictional event ledger\u003C/h2>\n\u003Cp>The following example is \u003Cstrong>hypothetical\u003C/strong>. Its measurements and records illustrate traceability; they are not recommended profiles, limits or a lifetime prediction.\u003C/p>\n\u003Cp>Assembly \u003Cstrong>P42-017\u003C/strong>, revision C, uses fictional laminate L17 and an ENIG finish. The current component list identifies U7 as moisture-sensitive; its exact handling and process restrictions are retained in document U7-D4. Its storage and opening timestamps are linked to the assembly traveler. Operators are identified as A and B; the proposed disposition owner is the quality engineer.\u003C/p>\n\u003Cp>For the measured events below, a type-K thermocouple was attached at the stated board-surface location on P42-017. Trace files contain the recorded heating and cooling curves. Peaks and times are only summaries of those particular points.\u003C/p>\n\u003Ctable>\n\u003Cthead>\n\u003Ctr>\n\u003Cth>Date, event and owner\u003C/th>\n\u003Cth>Region and evidence\u003C/th>\n\u003C/tr>\n\u003C/thead>\n\u003Ctbody>\u003Ctr>\n\u003Ctd>Apr 2 — Fabrication, supplier record\u003C/td>\n\u003Ctd>Whole bare board. Lamination and ENIG finish are identified in record F-17; detailed finishing thermal history was not supplied. No temperature profile is claimed.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Apr 5 — Side-A reflow, operator A\u003C/td>\n\u003Ctd>Whole board; sensor near U7 site. Peak 241°C, 52 seconds above 217°C; trace P-101.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Apr 6 — Side-B reflow, operator A\u003C/td>\n\u003Ctd>Whole board; same identified sensor region. Peak 238°C, 46 seconds above 217°C; trace P-102.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Apr 7 — Selective solder, operator B\u003C/td>\n\u003Ctd>Connector Q4 region; sensor on the upper surface near Q4. Peak 192°C, 35 seconds above 180°C; trace P-103.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Apr 8 — Touch-up, operator B\u003C/td>\n\u003Ctd>Q4 joint. Tool and duration entered in traveler T-17; no local temperature trace. Inspection recorded an acceptable appearance against the project criteria.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Apr 10 — U7 removal, operator B\u003C/td>\n\u003Ctd>U7 region; sensor on the board surface beside the package. Peak 232°C, 40 seconds above 217°C; trace P-104. Removed U7 was retained separately.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Apr 10 — Pad cleanup, operator B\u003C/td>\n\u003Ctd>U7 footprint. Tool, location and operator recorded; local temperature history not measured. Pad inspection images are linked to T-17.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Apr 11 — Replacement U7 installation, operator A\u003C/td>\n\u003Ctd>U7 region; sensor on the board surface beside the footprint. Peak 235°C, 44 seconds above 217°C; trace P-105. Replacement component lot and handling record are linked.\u003C/td>\n\u003C/tr>\n\u003C/tbody>\u003C/table>\n\u003Cp>The fictional inspection record reports no visible pad lift at U7 after replacement. An electrical test passed, but no microsection was performed. The proposed next event is another local operation at U7 to address a joint flagged for review. Its tool, expected heating footprint, profile evidence and acceptance plan have not yet been approved.\u003C/p>\n\u003Cp>Several details matter more than a raw count. The fabrication finishing record is incomplete. Two local operations lack measured temperature histories. The U7 sensor traces do not prove the peak inside U7 or at every neighboring feature. The replacement component has its own handling history, while the removed component’s history remains separate.\u003C/p>\n\u003Cp>The immediate disposition is therefore \u003Cstrong>hold for engineering review\u003C/strong>, not automatic release or automatic scrap. The review must address the known history and the uncertainties before the designated authority decides what happens next.\u003C/p>\n\u003Cdiv data-component=\"BlogQuickQuoteInline\">\u003C/div>\n\n\u003Ch2>Assess the next operation against the actual risks\u003C/h2>\n\u003Cp>Frame a specific engineering question: \u003Cem>Can the proposed U7 operation be performed on P42-017 while meeting the applicable product requirements, given its recorded history and unresolved gaps?\u003C/em> Then assess the risks separately.\u003C/p>\n\u003Cul>\n\u003Cli>\u003Cstrong>Laminate and interfaces:\u003C/strong> Review construction, material documentation, moisture and process history for risks such as delamination. The related \u003Ca href=\"/en/blog/pcb-delamination/\">PCB delamination guide\u003C/a> covers that mechanism in more detail.\u003C/li>\n\u003Cli>\u003Cstrong>Plated holes and vias:\u003C/strong> Heating and cooling can stress plated structures. A board that shows no surface blistering has not thereby demonstrated via integrity.\u003C/li>\n\u003Cli>\u003Cstrong>Pads and surrounding material:\u003C/strong> Removal and cleanup can contribute to pad lift or damage beneath a pad. Review handling forces, prior work and inspection evidence as well as temperature.\u003C/li>\n\u003Cli>\u003Cstrong>Finish and solder mask:\u003C/strong> Prior heat and handling may affect solderability, appearance or adhesion. Assess them against the applicable acceptance basis rather than assuming they are unchanged.\u003C/li>\n\u003Cli>\u003Cstrong>Solder joints and components:\u003C/strong> Consider the joint being reworked, adjacent joints, package bodies and their individual process restrictions. The replacement U7’s limits are not automatically the same as those of the removed part.\u003C/li>\n\u003C/ul>\n\u003Cp>Choose inspection and qualification evidence for the actual concern. Depending on the product and failure mechanism, that might involve visual or optical inspection, electrical testing, examination of a representative sample, or a qualified test plan. Record whether a sample used for evidence had already undergone repeated heating: its history is part of the result.\u003C/p>\n\u003Cp>An electrical pass after heating is useful evidence of the functions tested at that time. It \u003Cstrong>cannot prove the absence of latent damage\u003C/strong>. A weakened plated feature, damaged interface or marginal joint may still pass an immediate test and fail later under service conditions.\u003C/p>\n\u003Ch2>Moisture and missing records require their own disposition\u003C/h2>\n\u003Cp>Record packaging condition, storage environment where relevant, opening and exposure times, applicable moisture-sensitive component requirements, and any authorized conditioning or baking. Link each action to the board or component actually treated.\u003C/p>\n\u003Cp>For component packaging and floor-life records, see \u003Ca href=\"/en/blog/moisture-sensitive-devices-msl-handling/\">moisture-sensitive device handling\u003C/a>.\u003C/p>\n\u003Cp>Baking may be specified as part of a controlled moisture-management process. It does not erase earlier thermal damage, restore every board or component, or make an unknown history known. Follow the current product-specific documentation and project requirements rather than treating a bake as a universal reset.\u003C/p>\n\u003Cp>For a customer return or previously repaired assembly, identify what is known, what is reported but unverified, and what is missing. Try to recover travelers, component records, repair reports and profiles. If records remain unavailable, the authority may require additional evidence, restrict the proposed work, obtain customer disposition or reject the operation. An uncertainty disposition should state its rationale and owner—not silently enter zero prior exposures.\u003C/p>\n\u003Ch2>Release matrix for the fictional case\u003C/h2>\n\u003Cp>This matrix is \u003Cstrong>hypothetical\u003C/strong> and shows decision states, not a numerical life model or a substitute for product requirements.\u003C/p>\n\u003Ctable>\n\u003Cthead>\n\u003Ctr>\n\u003Cth>Evidence state\u003C/th>\n\u003Cth>Example disposition\u003C/th>\n\u003Cth>Required ownership\u003C/th>\n\u003C/tr>\n\u003C/thead>\n\u003Ctbody>\u003Ctr>\n\u003Ctd>Proposed operation and applicable board and component requirements are defined; history and risk evidence are sufficient\u003C/td>\n\u003Ctd>Release only the specified operation, with its approved process and inspection plan\u003C/td>\n\u003Ctd>The designated quality engineer records the decision; the process owner executes it\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>A material, component or profile restriction is unresolved, or a critical prior event is unknown\u003C/td>\n\u003Ctd>Hold while documentation, measurements or an authorized uncertainty disposition are obtained\u003C/td>\n\u003Ctd>Engineering identifies gaps and an accountable resolver\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Existing evidence is insufficient, but a representative qualification plan can address the stated concern\u003C/td>\n\u003Ctd>Hold the production unit pending review of that plan and results\u003C/td>\n\u003Ctd>Engineering and quality agree the plan and acceptance basis\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>The proposed operation conflicts with a requirement, damage exceeds acceptance criteria, or uncertainty cannot be responsibly resolved\u003C/td>\n\u003Ctd>Do not release the operation; determine an authorized alternative or final disposition\u003C/td>\n\u003Ctd>Designated product authority and customer, where required\u003C/td>\n\u003C/tr>\n\u003C/tbody>\u003C/table>\n\u003Cp>A release should identify the exact board, operation, equipment or approved process window, affected region, required inspection, decision date and approver. It should not be interpreted as permission for an additional, unreviewed repair. After the operation, add the actual evidence and outcome to the ledger; if the process deviates, reassess rather than relying on the earlier approval.\u003C/p>\n\u003Cp>For a new \u003Ca href=\"/en/products/pcb-assembly/\">PCB assembly\u003C/a> project, prepare the identity, construction and process records before the first heat event. For an existing assembly, reconstruct what can be supported and label the rest. The \u003Ca href=\"/en/blog/pcb-rework/\">PCB rework\u003C/a> article discusses repair planning and checks. Teams can use the \u003Ca href=\"/en/quote/\">quote request\u003C/a> to start a project discussion with the relevant documentation and open questions.\u003C/p>\n\u003C!-- faq:start -->\n\u003Ch2>FAQ\u003C/h2>\n\u003Ch3>Is there a universal maximum number of soldering cycles?\u003C/h3>\n\u003Cp>No. The decision depends on the board construction, materials, components, profiles, affected regions, prior history and applicable qualification. A count can organize the record but cannot by itself release the next operation.\u003C/p>\n\u003Ch3>Can T260 or T288 be converted into permitted reflow cycles?\u003C/h3>\n\u003Cp>No. They are material tests conducted in specified test contexts. They do not represent separated dynamic assembly profiles or provide a finished-board cycle allowance.\u003C/p>\n\u003Ch3>Should a local repair be recorded as a whole-board reflow?\u003C/h3>\n\u003Cp>No. Record what was actually done and where heating was measured. Local work can still affect nearby or opposite-side features, but there is no universal conversion factor between it and whole-board reflow.\u003C/p>\n\u003Ch3>Does an electrical pass mean the assembly has no heat damage?\u003C/h3>\n\u003Cp>No. It establishes only the results of the tests performed at that time. Latent laminate, plated-feature, pad, joint or component damage may require different evidence and may not appear in an immediate electrical test.\u003C/p>\n\u003Ch3>What if the earlier heat history cannot be recovered?\u003C/h3>\n\u003Cp>Mark it unknown, document recovery attempts and escalate the gap to the designated authority. The disposition may require additional evidence, a restricted process, customer agreement or a decision not to proceed. Do not treat missing events as zero.\u003C/p>\n\u003C!-- faq:end -->\n\u003Csection class=\"related-links\" aria-label=\"Related\">\u003Ch3>Related links\u003C/h3>\u003Cul>\u003Cli>\u003Ca href=\"/en/blog/reflow-thermocouple-attachment-profiling/\">Thermocouple Attachment for PCB Reflow Profiling\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/blog/pcb-delamination/\">PCB Delamination: Causes, Measling vs Blistering, IPC-A-600 Acceptance, and How to Prevent It\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/blog/moisture-sensitive-devices-msl-handling/\">Moisture-Sensitive Devices: MSL and Floor-Life Control\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/products/pcb-assembly/\">PCB assembly\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/blog/pcb-rework/\">PCB and PCBA Rework: BGA Repair, SMT Rework and Quality Checks\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/quote/\">quote request\u003C/a>\u003C/li>\u003C/ul>\u003C/section>",[15,18,21,24,27],{"question":16,"answer":17,"answerText":17},"Is there a universal maximum number of soldering cycles?","No. The decision depends on the board construction, materials, components, profiles, affected regions, prior history and applicable qualification. A count can organize the record but cannot by itself release the next operation.",{"question":19,"answer":20,"answerText":20},"Can T260 or T288 be converted into permitted reflow cycles?","No. They are material tests conducted in specified test contexts. They do not represent separated dynamic assembly profiles or provide a finished-board cycle allowance.",{"question":22,"answer":23,"answerText":23},"Should a local repair be recorded as a whole-board reflow?","No. Record what was actually done and where heating was measured. Local work can still affect nearby or opposite-side features, but there is no universal conversion factor between it and whole-board reflow.",{"question":25,"answer":26,"answerText":26},"Does an electrical pass mean the assembly has no heat damage?","No. It establishes only the results of the tests performed at that time. Latent laminate, plated-feature, pad, joint or component damage may require different evidence and may not appear in an immediate electrical test.",{"question":28,"answer":29,"answerText":29},"What if the earlier heat history cannot be recovered?","Mark it unknown, document recovery attempts and escalate the gap to the designated authority. The disposition may require additional evidence, a restricted process, customer agreement or a decision not to proceed. Do not treat missing events as zero.",[31,32,33],"thermal exposure","PCB rework","reflow soldering","pcb-soldering-thermal-exposure-ledger","en",[35,37,38,39,40],"de","cn","fr","ru",{"blog":42,"breadcrumb":51},{"@context":43,"@type":44,"headline":4,"description":5,"image":8,"url":45,"datePublished":6,"dateModified":6,"timeRequired":12,"keywords":46,"articleSection":7,"author":47,"publisher":50},"https://schema.org","BlogPosting","https://hilpcb.com/en/blog/pcb-soldering-thermal-exposure-ledger/","thermal exposure, PCB rework, reflow soldering",{"@type":48,"name":49},"Organization","HILPCB",{"@type":48,"name":49},{"@context":43,"@type":52,"itemListElement":53},"BreadcrumbList",[54,59,63],{"@type":55,"position":56,"name":57,"item":58},"ListItem",1,"Home","https://hilpcb.com/",{"@type":55,"position":60,"name":61,"item":62},2,"Blog","https://hilpcb.com/en/blog/",{"@type":55,"position":64,"name":34,"item":45},3,1795020491900]