[{"data":1,"prerenderedAt":65},["ShallowReactive",2],{"blog-solder-paste-jetting-vs-stencil-printing-en":3},{"title":4,"description":5,"date":6,"lastUpdated":6,"category":7,"image":8,"imageAlt":9,"readingTime":10,"wordCount":11,"timeRequired":12,"htmlContent":13,"faq":14,"tags":30,"slug":34,"sourceLocale":35,"availableLocales":36,"jsonld":41},"Solder Paste Jet Printing vs. Stencil Printing","Compare solder paste jetting, stencil printing and hybrid routes by board geometry, qualified materials, full-line throughput, cost and inspection.","2026-11-13","assembly",null,"",12,2381,"PT12M","\u003Cp>\u003Cstrong>Choose stencil printing\u003C/strong> when a qualified stencil can deposit the required paste across the panel and the setup is justified by the production plan. \u003Cstrong>Consider jet printing\u003C/strong> when programmable deposits or frequent revisions offer a useful advantage and the machine, paste, and board geometry have been qualified together. \u003Cstrong>Consider a hybrid route\u003C/strong> when printing most pads and selectively jetting others solves a specific deposit problem that neither route handles as well alone.\u003C/p>\n\u003Cp>The decision belongs to the complete assembly process, not just the paste application step. Check access to every target pad, required deposit volumes, changeovers, inspection, reflow, and the line’s actual bottleneck before comparing costs.\u003C/p>\n\u003Cp>This choice is separate from \u003Ca href=\"/en/blog/smt-stencil-design/\">SMT stencil design\u003C/a>, which determines how a selected stencil deposits paste, and from \u003Ca href=\"/en/blog/solder-paste-inspection-spi/\">solder paste inspection (SPI)\u003C/a>, which measures deposits after application. The \u003Ca href=\"/en/blog/solder-paste/\">solder paste guide\u003C/a> covers material selection and handling that affect all three routes.\u003C/p>\n\u003Ch2>Start with the board, not the batch size\u003C/h2>\n\u003Cp>Stencil printing pushes paste through openings onto many pads in one print stroke. Jet printing uses a programmed dispenser to place paste without a stencil contacting the board. A hybrid process generally prints first, then jets selected locations; its exact sequence and inspection points must be defined and qualified.\u003C/p>\n\u003Cp>None of these descriptions establishes that a given assembly provider offers the process. Ask about equipment and capacity for the specific project before making a route part of the production plan.\u003C/p>\n\u003Ch3>Check geometry and reach\u003C/h3>\n\u003Cp>Review the actual assembly side and panel, including:\u003C/p>\n\u003Cul>\n\u003Cli>Pad sizes, pitches, spacing, and nearby exposed features.\u003C/li>\n\u003Cli>Board outline, panel rails, fiducials, support points, and expected flatness.\u003C/li>\n\u003Cli>Components, connectors, shields, or fixtures that may obstruct access.\u003C/li>\n\u003Cli>Both sides of a double-sided assembly, especially if the second side is processed after the first is populated.\u003C/li>\n\u003Cli>Locations where large thermal pads and small component pads need different paste volumes.\u003C/li>\n\u003C/ul>\n\u003Cp>A jet head needs a viable approach, working clearance, positioning reference, and suitable distance to each target. Nearby features can obstruct the head or affect deposition; programmable placement does not mean every surface is reachable. The board and program still require alignment and verification.\u003C/p>\n\u003Cp>A stencil needs suitable board support, gasket contact, and an opening design that releases paste consistently. Obstructions or an uneven assembly surface can complicate contact. Local stencil features or other tooling may help, but they must fit the board and process.\u003C/p>\n\u003Cp>Start from the intended paste pattern, not every opening visible in the solder mask. Copper, mask, and drill data alone do not establish which features should receive paste. Confirm the paste layer against component requirements and the assembly drawing.\u003C/p>\n\u003Ch3>Define volume before choosing the tool\u003C/h3>\n\u003Cp>For critical pads, specify the intended deposit volume and its acceptable variation, not just a dot diameter or stencil opening. Too little paste can leave insufficient solder; too much can contribute to bridging, solder balls, or other joint problems.\u003C/p>\n\u003Cp>Stencil thickness, opening shape, paste release, and print settings affect the result. Jet volume depends on the qualified machine, paste, program, and deposition conditions; multiple deposits may be needed at a location. In a hybrid process, specify whether a pad is printed, jetted, or printed and then supplemented—and the target \u003Cstrong>total\u003C/strong> volume after both steps.\u003C/p>\n\u003Cp>Opening-ratio rules can be useful design screens, but they are not universal acceptance limits or proof of compliance with an assembly standard. Validate difficult features with measured deposits and post-reflow results.\u003C/p>\n\u003Ch2>Decision matrix\u003C/h2>\n\u003Ctable>\n\u003Cthead>\n\u003Ctr>\n\u003Cth>Decision evidence\u003C/th>\n\u003Cth>Stencil printing\u003C/th>\n\u003Cth>Jet printing\u003C/th>\n\u003Cth>Qualified hybrid\u003C/th>\n\u003C/tr>\n\u003C/thead>\n\u003Ctbody>\u003Ctr>\n\u003Ctd>\u003Cstrong>Pad mix and volume\u003C/strong>\u003C/td>\n\u003Ctd>Evaluate whether one stencil design can deliver suitable volumes across the panel.\u003C/td>\n\u003Ctd>Evaluate whether programmed deposits can meet volume and spacing needs at each target.\u003C/td>\n\u003Ctd>Use where a defined subset needs a different deposit strategy; verify combined volumes where methods overlap.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>\u003Cstrong>Physical access\u003C/strong>\u003C/td>\n\u003Ctd>Check contact, support, flatness, and tooling around obstructions.\u003C/td>\n\u003Ctd>Check head clearance, target reach, working distance, and board registration.\u003C/td>\n\u003Ctd>Satisfy both sets of constraints without disturbing the first deposits.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>\u003Cstrong>Revisions and changeovers\u003C/strong>\u003C/td>\n\u003Ctd>Assess stencil modification or replacement, storage, setup, and alignment.\u003C/td>\n\u003Ctd>Assess program updates, verification, paste change, and machine setup.\u003C/td>\n\u003Ctd>Plan both tooling and program control; a change in either can affect the released process.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>\u003Cstrong>Panel cycle\u003C/strong>\u003C/td>\n\u003Ctd>Time loading, alignment, print, separation, cleaning allowance, and transfer.\u003C/td>\n\u003Ctd>Time loading, alignment, all deposits, travel, verification, and transfer.\u003C/td>\n\u003Ctd>Time both application steps, handling between them, any extra inspection, and recovery.\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>\u003Cstrong>Release evidence\u003C/strong>\u003C/td>\n\u003Ctd>Review deposit measurements and reflow results for challenging openings.\u003C/td>\n\u003Ctd>Review machine–paste qualification, measured deposits, and reflow results.\u003C/td>\n\u003Ctd>Review evidence for each method and for their interaction, including material compatibility.\u003C/td>\n\u003C/tr>\n\u003C/tbody>\u003C/table>\n\u003Cp>Use the matrix to identify what must be demonstrated, not to score a route from generic claims. A revised board may change the answer even if its quantity stays the same.\u003C/p>\n\u003Ch2>Qualify the machine, paste, and sequence together\u003C/h2>\n\u003Cp>A paste described as suitable for jetting is not automatically suitable for every jetting machine or valve. Confirm the exact machine and dispensing configuration, paste product, alloy, powder characteristics, cartridge or delivery format, and operating instructions with the relevant suppliers and assembly provider.\u003C/p>\n\u003Cp>For example, AIM Solder&#39;s J8 product documentation identifies compatible equipment and excludes a particular jetter family. Its \u003Cem>Solder Paste Dispensing in PCB Assembly\u003C/em> paper discusses dispensing as an alternative or supplement to printing. These are supplier-specific references, not evidence that a given assembler offers jetting or that another material and machine combination is qualified.\u003C/p>\n\u003Cp>Qualification should cover preparation and storage, usable life during production, deposit repeatability, interruptions, restart procedures, and maintenance. Run representative patterns containing the board’s smallest, largest, and most closely spaced targets—not just a convenient test dot.\u003C/p>\n\u003Cp>For stencil printing, qualify the stencil, paste, support, alignment, print settings, separation, and cleaning method together. Paste behavior and deposit release can change with the combination.\u003C/p>\n\u003Cp>For hybrid assembly, add a material and sequence review:\u003C/p>\n\u003Cul>\n\u003Cli>If two pastes are used, verify their alloys, flux systems, reflow requirements, and residues are compatible for the intended product.\u003C/li>\n\u003Cli>Confirm whether they contact or mix on any pad, and test that condition rather than assuming compatibility.\u003C/li>\n\u003Cli>Check that the jet operation does not smear, displace, or contaminate existing printed deposits.\u003C/li>\n\u003Cli>Establish inspection and correction limits for the final combined deposit.\u003C/li>\n\u003C/ul>\n\u003Cp>Even when the same paste is intended for both steps, confirm it is qualified for both application methods and their equipment.\u003C/p>\n\u003Ch2>Compare revisions, cleaning, and the complete panel cycle\u003C/h2>\n\u003Cp>A stencil-free program can make some design changes easier to implement, but programming, alignment, test deposits, and approval still take time. Stencil printing may require revised tooling when paste apertures change, although not every board revision necessarily changes the stencil. In either case, control the board revision, paste data, program or stencil revision, and inspection recipe as a matched set.\u003C/p>\n\u003Cp>Cleaning is also route-specific. A stencil process needs an established approach to underside wiping, tooling cleanup, and paste management. Jetting has no stencil underside to wipe, but its dispensing system, work area, and material handling can still require cleaning and maintenance. A hybrid route can incur both sets of tasks. Set cleaning intervals from process observation and supplier guidance rather than assuming one interval fits every job.\u003C/p>\n\u003Ch3>Time the panel through the line\u003C/h3>\n\u003Cp>Do not compare a print stroke with a machine’s advertised maximum jetting frequency. Measure or estimate the full time per panel for the actual pattern:\u003C/p>\n\u003Col>\n\u003Cli>Load, support, identify, and align the panel.\u003C/li>\n\u003Cli>Apply all required deposits, including head travel or print and separation.\u003C/li>\n\u003Cli>Include normal cleaning, checks, interruptions, and transfer time as applicable.\u003C/li>\n\u003Cli>For hybrid processing, include both application steps and any movement or inspection between them.\u003C/li>\n\u003Cli>Include SPI, placement, reflow entry, and downstream inspection in the line assessment.\u003C/li>\n\u003C/ol>\n\u003Cp>Some operations can overlap on different panels; others cannot. If printing and jetting are sequential operations on the same hybrid panel, both consume process time, even if separate machines allow partial overlap across panels. Reflow oven dwell time is not automatically the panel-to-panel output interval: belt spacing and loading rate matter too.\u003C/p>\n\u003Cp>The slowest sustained stage, including its normal downtime and recovery, constrains line output. Compare qualified good output over a representative run, not nominal machine speed alone.\u003C/p>\n\u003Ch2>A hypothetical cost comparison\u003C/h2>\n\u003Cp>The following is an invented planning exercise, \u003Cstrong>not a supplier price or a volume rule\u003C/strong>. All three routes are assumed technically acceptable for one board revision and one uninterrupted run. A panel contains four boards.\u003C/p>\n\u003Cp>Assume the fixed setup covers route-specific preparation, tooling or programming, and setup verification. The variable amount per accepted board includes paste application, routine cleaning, inspection, reflow, and an assumed allowance for normal scrap and rework. Bare boards, components, shipping, taxes, and reliability testing beyond normal release are excluded and assumed equal. If those exclusions differ by route, add the differences before deciding.\u003C/p>\n\u003Ctable>\n\u003Cthead>\n\u003Ctr>\n\u003Cth>Route\u003C/th>\n\u003Cth align=\"right\">Fixed setup\u003C/th>\n\u003Cth align=\"right\">Variable cost per accepted board\u003C/th>\n\u003C/tr>\n\u003C/thead>\n\u003Ctbody>\u003Ctr>\n\u003Ctd>Jet\u003C/td>\n\u003Ctd align=\"right\">$80\u003C/td>\n\u003Ctd align=\"right\">$5\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Stencil\u003C/td>\n\u003Ctd align=\"right\">$220\u003C/td>\n\u003Ctd align=\"right\">$2\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>Hybrid\u003C/td>\n\u003Ctd align=\"right\">$280\u003C/td>\n\u003Ctd align=\"right\">$4\u003C/td>\n\u003C/tr>\n\u003C/tbody>\u003C/table>\n\u003Cp>For each route, the comparison is:\u003C/p>\n\u003Cp>\u003Cstrong>Total = fixed setup + variable cost × accepted boards\u003C/strong>\u003C/p>\n\u003Ctable>\n\u003Cthead>\n\u003Ctr>\n\u003Cth>Accepted quantity\u003C/th>\n\u003Cth align=\"right\">Jet\u003C/th>\n\u003Cth align=\"right\">Stencil\u003C/th>\n\u003Cth align=\"right\">Hybrid\u003C/th>\n\u003C/tr>\n\u003C/thead>\n\u003Ctbody>\u003Ctr>\n\u003Ctd>40 boards, or 10 panels\u003C/td>\n\u003Ctd align=\"right\">$80 + ($5 × 40) = \u003Cstrong>$280\u003C/strong>\u003C/td>\n\u003Ctd align=\"right\">$220 + ($2 × 40) = \u003Cstrong>$300\u003C/strong>\u003C/td>\n\u003Ctd align=\"right\">$280 + ($4 × 40) = \u003Cstrong>$440\u003C/strong>\u003C/td>\n\u003C/tr>\n\u003Ctr>\n\u003Ctd>200 boards, or 50 panels\u003C/td>\n\u003Ctd align=\"right\">$80 + ($5 × 200) = \u003Cstrong>$1,080\u003C/strong>\u003C/td>\n\u003Ctd align=\"right\">$220 + ($2 × 200) = \u003Cstrong>$620\u003C/strong>\u003C/td>\n\u003Ctd align=\"right\">$280 + ($4 × 200) = \u003Cstrong>$1,080\u003C/strong>\u003C/td>\n\u003C/tr>\n\u003C/tbody>\u003C/table>\n\u003Cp>Under these invented assumptions, jetting has the lowest total for 40 accepted boards, while stencil printing has the lowest for 200. The hybrid route is not the least expensive in either calculation, but it could still be justified if it is the only qualified way to meet a difficult deposit requirement.\u003C/p>\n\u003Cp>Different setup charges, panel utilization, cycle times, yields, revision frequency, or inspection needs can change the result. The arithmetic does not establish a general quantity at which one method becomes preferable.\u003C/p>\n\u003Ch2>Inspect deposits, then verify joints\u003C/h2>\n\u003Cp>SPI can measure characteristics such as deposit volume, height, area, and position relative to a programmed target, subject to the inspection system’s capability and settings. Agree on the measurement definition, critical pads, limits, sampling or coverage, and response to failures. Challenging geometries or access can affect measurement, so verify that the selected system can inspect the features that matter.\u003C/p>\n\u003Cp>For a hybrid route, define whether inspection occurs after printing, after jetting, or at both points. If the process permits deposit correction, specify who authorizes it, how it is recorded, and whether the corrected area is reinspected.\u003C/p>\n\u003Cp>\u003Cstrong>SPI alone does not validate final solder joints.\u003C/strong> Deposits can look acceptable before reflow while placement, heating, wetting, or other factors produce an unacceptable joint. Establish an appropriate reflow profile for the assembly and verify results using the agreed post-reflow inspection methods. Depending on the joint and product risk, these may include visual or optical inspection, X-ray for selected hidden joints, and destructive examination of test samples.\u003C/p>\n\u003Cp>Where reliability matters, agree on representative test conditions and acceptance criteria for the intended service environment. A successful sample build is useful evidence, but it does not by itself establish ongoing production capability or product reliability.\u003C/p>\n\u003Cp>For the records that can document the agreed checks and their scope, see the \u003Ca href=\"/en/blog/pcb-assembly-inspection-report/\">PCB assembly inspection report\u003C/a>.\u003C/p>\n\u003Ch2>RFQ and release checklist\u003C/h2>\n\u003Cp>Send the assembly provider:\u003C/p>\n\u003Cul>\n\u003Cli>\u003Cstrong>Controlled design files:\u003C/strong> board and assembly revisions, Gerbers or equivalent manufacturing data, paste layer, fabrication and assembly drawings, and panel information.\u003C/li>\n\u003Cli>\u003Cstrong>Component information:\u003C/strong> BOM, package data, placement files, and identification of critical fine-pitch, thermal, hidden-joint, or unusual-volume locations.\u003C/li>\n\u003Cli>\u003Cstrong>Geometry constraints:\u003C/strong> board thickness and flatness requirements, both assembly sides, panel supports, existing components, keep-outs, and potential head or tooling obstructions.\u003C/li>\n\u003Cli>\u003Cstrong>Demand plan:\u003C/strong> accepted quantity, panelization, expected repeat orders, revision frequency, and required delivery dates.\u003C/li>\n\u003Cli>\u003Cstrong>Material requirements:\u003C/strong> alloy, flux and residue constraints, cleaning expectations, storage restrictions, and any known compatibility concerns.\u003C/li>\n\u003Cli>\u003Cstrong>Quality requirements:\u003C/strong> deposit targets and SPI limits, post-reflow inspection, reliability verification, traceability, and records needed for release.\u003C/li>\n\u003C/ul>\n\u003Cp>Before release, ask the provider to confirm:\u003C/p>\n\u003Cul>\n\u003Cli>Which of the three routes it can actually offer for this board, and any subcontracted steps.\u003C/li>\n\u003Cli>The proposed machine and paste combination, and its qualification evidence.\u003C/li>\n\u003Cli>Which pads receive paste by each method, including any overlapping deposits.\u003C/li>\n\u003Cli>The controlled stencil, jet program, board data, and inspection-recipe revisions.\u003C/li>\n\u003Cli>The complete panel cycle, line constraint, setup assumptions, and handling of scrap or rework.\u003C/li>\n\u003Cli>The cleaning, inspection, reflow, and change-control plans.\u003C/li>\n\u003Cli>Any remaining tests or approvals required before production.\u003C/li>\n\u003C/ul>\n\u003Cp>For a \u003Ca href=\"/en/products/pcb-assembly/\">PCB assembly\u003C/a> discussion, use the \u003Ca href=\"/en/quote/\">quote request\u003C/a> to submit the package and ask for route-specific feasibility and costing. Treat the selected route as released only after the required evidence and responsibilities are agreed.\u003C/p>\n\u003Cdiv data-component=\"BlogQuickQuoteInline\">\u003C/div>\n\n\u003C!-- faq:start -->\n\u003Ch2>FAQ\u003C/h2>\n\u003Ch3>Is jet printing always better for prototypes?\u003C/h3>\n\u003Cp>No. A programmable pattern can be useful when revisions are frequent, but reach, material qualification, setup, inspection, and available equipment still matter. Compare the actual prototype scope with a suitable stencil route.\u003C/p>\n\u003Ch3>Can stencil printing handle different solder paste volumes on one board?\u003C/h3>\n\u003Cp>It can address different requirements through stencil design, including aperture choices and, where appropriate, local thickness changes. The proposed design still needs deposit and reflow verification for the actual pad mix.\u003C/p>\n\u003Ch3>When is a hybrid paste process worth considering?\u003C/h3>\n\u003Cp>Consider it when most deposits can be printed effectively but selected pads need a qualified alternative or supplement. Account for the second operation, material compatibility, handling, inspection, and any extra cycle time.\u003C/p>\n\u003Ch3>Does SPI approval prove the assembly is reliable?\u003C/h3>\n\u003Cp>No. SPI evaluates the paste deposits within its measurement capability; it does not prove that final joints are acceptable or reliable. Post-reflow inspection and risk-appropriate verification remain necessary.\u003C/p>\n\u003Ch3>Can the same solder paste be used for printing and jetting?\u003C/h3>\n\u003Cp>Possibly, but do not assume it. Confirm that the exact paste is qualified for the stencil process and the specific jetting machine and configuration. If different pastes are proposed, verify their interaction through reflow and in the remaining residues.\u003C/p>\n\u003C!-- faq:end -->\n\u003Csection class=\"related-links\" aria-label=\"Related\">\u003Ch3>Related links\u003C/h3>\u003Cul>\u003Cli>\u003Ca href=\"/en/blog/smt-stencil-design/\">How to Design an SMT Stencil: What to Freeze First About Apertures, Thickness, and the Printing Window\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/blog/solder-paste-inspection-spi/\">What Is Solder Paste Inspection (SPI)? Measurements and Print Release\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/blog/solder-paste/\">What Is Solder Paste? Composition, Alloys, Storage and How It Is Used in SMT\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/blog/pcb-assembly-inspection-report/\">PCB Assembly Inspection Report Format: Template and Checklist\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/products/pcb-assembly/\">PCB assembly\u003C/a>\u003C/li>\u003Cli>\u003Ca href=\"/en/quote/\">quote request\u003C/a>\u003C/li>\u003C/ul>\u003C/section>",[15,18,21,24,27],{"question":16,"answer":17,"answerText":17},"Is jet printing always better for prototypes?","No. A programmable pattern can be useful when revisions are frequent, but reach, material qualification, setup, inspection, and available equipment still matter. Compare the actual prototype scope with a suitable stencil route.",{"question":19,"answer":20,"answerText":20},"Can stencil printing handle different solder paste volumes on one board?","It can address different requirements through stencil design, including aperture choices and, where appropriate, local thickness changes. The proposed design still needs deposit and reflow verification for the actual pad mix.",{"question":22,"answer":23,"answerText":23},"When is a hybrid paste process worth considering?","Consider it when most deposits can be printed effectively but selected pads need a qualified alternative or supplement. Account for the second operation, material compatibility, handling, inspection, and any extra cycle time.",{"question":25,"answer":26,"answerText":26},"Does SPI approval prove the assembly is reliable?","No. SPI evaluates the paste deposits within its measurement capability; it does not prove that final joints are acceptable or reliable. Post-reflow inspection and risk-appropriate verification remain necessary.",{"question":28,"answer":29,"answerText":29},"Can the same solder paste be used for printing and jetting?","Possibly, but do not assume it. Confirm that the exact paste is qualified for the stencil process and the specific jetting machine and configuration. If different pastes are proposed, verify their interaction through reflow and in the remaining residues.",[31,32,33],"solder paste jetting","stencil printing","SMT assembly","solder-paste-jetting-vs-stencil-printing","en",[35,37,38,39,40],"de","cn","fr","ru",{"blog":42,"breadcrumb":51},{"@context":43,"@type":44,"headline":4,"description":5,"url":45,"datePublished":6,"dateModified":6,"timeRequired":12,"keywords":46,"articleSection":7,"author":47,"publisher":50},"https://schema.org","BlogPosting","https://hilpcb.com/en/blog/solder-paste-jetting-vs-stencil-printing/","solder paste jetting, stencil printing, SMT assembly",{"@type":48,"name":49},"Organization","HILPCB",{"@type":48,"name":49},{"@context":43,"@type":52,"itemListElement":53},"BreadcrumbList",[54,59,63],{"@type":55,"position":56,"name":57,"item":58},"ListItem",1,"Home","https://hilpcb.com/",{"@type":55,"position":60,"name":61,"item":62},2,"Blog","https://hilpcb.com/en/blog/",{"@type":55,"position":64,"name":34,"item":45},3,1795146063904]