PCB Impedance Calculator (Microstrip, Stripline, Differential)

Calculate trace impedance for high-speed PCB designs

Accurate impedance calculations for microstrip, stripline, and differential pairs with — entered geometry and material parameters are sent to the calculation API; no board file is required.

Need Help? [email protected]

PCB Impedance Calculator — Microstrip, Stripline, Differential, CPW

Choose the transmission-line structure that matches your geometry: microstrip, stripline, coupled microstrip, coplanar waveguide, or one of the available cable and waveguide models. Enter the dielectric properties and dimensions required by that model, then review the nominal result and its assumptions.

Calculations send the entered geometry and material parameters to the calculation API. Results depend on the selected model and inputs; they do not establish a manufacturing tolerance or guarantee that a complete high-speed channel will pass.

How should I use the result in a controlled-impedance RFQ?

Send the intended stackup, material grade, copper profile, target impedance, tolerance and coupon requirements with your fabrication files. HilPCB's published ±5% and qualified ±3% controlled-impedance options need confirmation for the actual construction. The quotation defines the manufacturing and TDR verification scope.

What about differential pairs and via transitions?

Use coupled microstrip for an edge-coupled pair and the available coplanar models for their corresponding conductor and ground geometry. A via transition needs its own pad, antipad, barrel, stub and return-path model; this page does not provide a via-impedance mode.

Transmission Line Type

WHT

Substrate Parameters

Component Parameters

Physical Parameters

Electrical Parameters

Results

Effective εᵣ:
Conductor losses:
Dielectric losses:
Skin depth: