Shortages, long lead times and end-of-life notices can lead buyers to consider sources outside a manufacturer’s authorized channel. Planning for lifecycle changes and approved alternatives can reduce the need for unplanned purchases. When an exception is considered, the source, available records, intended application and possible inspection options all merit review.
No single inspection or test proves authenticity. A result is evidence to interpret alongside other information, not a verdict by itself. The applicable contract and controlled documents govern the work.
1. What “Counterfeit” Can Cover
Counterfeit concerns can involve components represented in a misleading way. The meaning and treatment of a suspected counterfeit depend on the applicable contract, law and procedures. Examples of concerns include:
- Remarking: a component represented as a different part number, grade or production date.
- Undisclosed reuse: a previously used component represented as new.
- Misrepresented rejects: a part represented as acceptable despite a known rejection or other discrepancy.
- Unauthorized copies: a copy represented as a product from another manufacturer.
- Incorrect package contents: a package represented as containing a device that it does not contain.
- Altered programmable parts: firmware or configuration represented inaccurately.
A used, refurbished or alternate part is not necessarily counterfeit merely because it is used, refurbished or different. Its identity, condition, representation and the applicable requirements matter.
2. Sourcing and Traceability
A manufacturer or authorized distributor may be a useful starting point for procurement. Verify authorization for the specific manufacturer, product, region, transaction and date, rather than relying on a general statement that a seller is authorized. Check the applicable terms with the relevant parties.
Authorized sourcing does not, by itself, prove the identity or condition of a particular lot, establish full traceability or guarantee a warranty. Those questions depend on the records, transaction and applicable terms. Independent distributors and brokers may offer stock, but the information available about its history can vary.
Design and procurement teams can also review lifecycle status, approved alternatives and potential last-time-buy decisions. See the BOM error-checking guide for related planning considerations.
3. Inspection and Test: Evidence, Not Proof
Every inspection and test outcome depends on the device and package, the suitability of any known-good reference, the setup, coverage and interpretation. References may not capture legitimate manufacturing variation. Similar construction does not establish authenticity, and a difference alone does not establish that a part is counterfeit.
The following methods illustrate possible sources of evidence. Their suitability and limitations depend on the project and the specific parts.
| Method | What it may help examine | Important limitation |
|---|---|---|
| Documentation review | Consistency of purchase records, labels, certificates and available traceability information | Documents can be incomplete, mistaken or misrepresented; their presence alone does not establish lot identity or condition. |
| External visual inspection | Markings, surfaces, leads and packaging | Appearance can vary for legitimate reasons, and some concerns may not be visible. |
| Marking or surface tests | How a marking or surface responds to a specified test | Results depend on materials and procedure; testing can alter or damage the surface. |
| X-ray | Internal features visible under the chosen setup, potentially for comparison with a suitable reference | Similar images do not establish authenticity, and differences require interpretation. Some concerns may not be visible. |
| XRF | Elemental composition at the area examined, such as a lead finish | It does not establish the history or authenticity of the device. |
| Scanning acoustic microscopy | Certain internal interfaces or discontinuities, where the device and setup permit | An observed feature needs interpretation in context; the method does not establish provenance. |
| Electrical testing | Behavior covered by the selected conditions and measurements | Passing the tested conditions does not establish performance under untested conditions or prove authenticity. |
| Decapsulation and die inspection | Die features and markings visible after opening a package | It is destructive, and a die observation alone does not establish the component’s history or grade. |
| Temperature or stress testing | Behavior under the conditions chosen for the test | Coverage is limited to the setup and conditions; testing may affect the parts. |
As specific examples, Shimadzu's resistor-terminal plating example describes XRF analysis of lead in tin-plated resistor terminals, including thickness correction and cut lead-wire preparation; Sandia's acoustic microscopy study discusses imaging package interfaces and how interpretation depends on the system, transducer and operator. Neither example establishes authenticity, coverage, acceptance, test results or a service capability for an unspecified device.
Visual inspection can document markings, surfaces, leads and packaging. Responsible parties should evaluate observed differences against documented acceptance criteria and appropriate references; a difference alone does not establish counterfeiting, authenticity or prior use.
For example, a reused genuine component may have the expected die, while a differently marked grade may have internal features similar to those of the ordered part. Conversely, an unexpected feature may have a legitimate explanation. Conclusions require interpretation of the available evidence, not reliance on one observation.
4. Questions for a Project-Specific Plan
This table is non-normative. It is a set of discussion questions, not a risk ladder or minimum test plan.
| Topic | Questions to discuss |
|---|---|
| Application | What are the consequences of an incorrect or unsuitable component in this application? |
| Source | What is known about the seller’s authorization for this transaction and the stock’s history? |
| Records | Which documents are available, and can they be checked against the transaction and lot? |
| Reference | Is a suitable known-good reference available, and what manufacturing variation might affect comparisons? |
| Inspection and test | What can each proposed method examine on this device and package, and what would remain outside its coverage? |
| Handling | Could a proposed test alter the parts or evidence? How will results and limitations be interpreted? |
| Decisions | Who has authority to accept, investigate or disposition the parts under the applicable procedure? |
The responsible parties should agree on the project’s approach using the applicable contract and controlled documents. No generic method list establishes the right coverage for every part or application.
5. Standards and Contract References
Names such as AS5553, AS6081, AS6171 and IDEA-STD-1010 may arise in project discussions. Do not assume that a named document or a general summary of it applies to a particular purchase or test. Responsible parties should identify the exact controlled revision, any applicable method documents and the contract terms for the project, and determine their applicability before work begins.
6. Contract and RFQ Discussions
A purchase order, quality agreement or RFQ can make responsibilities clearer. Depending on the project, parties may wish to discuss:
- Sourcing: authorized-source preferences, verification and the process for considering exceptions.
- Records: what documentation is available, what is requested and how lot information will be associated with the build.
- Inspection and test: proposed work, limitations, responsibilities and how results will be interpreted.
- Evidence: what records or reports are to be provided or retained, by whom and under what terms.
- Suspect parts: the applicable quarantine, evidence-preservation and decision process, including who has authority to act.
- Supplier flow-down: which agreed terms, if any, apply to sub-tier suppliers.
- Alternates: how substitutions are proposed, reviewed and approved.
If parts are suspected, quarantine them and preserve relevant evidence subject to the actual applicable procedure. Return, notification, database reporting and disposition depend on the responsible authority, contract, law, reporting eligibility and evidence status. They should not be treated as universal instructions.
HILPCB's turnkey assembly page describes BOM review, franchised sourcing, XRF and electrical screening, and traceability options. The product page also lists X-ray for assembly inspection; that is not a claim of component authentication. For a specific order, confirm the sourcing arrangements, proposed screening methods, sample coverage, traceability and records. Send the BOM, approved alternatives and sourcing requirements with a quote request. For background on assembly inspection, see the X-ray PCB inspection guide.
Frequently Asked Questions
How do counterfeit components enter the supply chain?
Misrepresented components can appear through different supply routes. Shortages and obsolete parts may lead buyers to consider unfamiliar or non-authorized sources, where available history can vary. Verify authorization for the manufacturer, product, region, transaction and date, and assess the records available for the lot.
Can X-ray detect counterfeit chips?
X-ray may reveal internal features relevant to an investigation, but its usefulness depends on the device, package, setup, coverage, reference and interpretation. A similarity does not prove authenticity, and a difference does not by itself prove counterfeiting.
How does a project determine which documents apply?
Responsible parties should identify the exact controlled document revisions and contract terms for the project, then determine their applicability before work begins. Do not infer a document's applicability or requirements from its name alone.
Which test detects recycled components?
No single test universally establishes that a component was recycled or reused. Records, physical observations and test results may contribute evidence, but each has limitations. Findings depend on the part, reference, setup, coverage and interpretation.
What should I do with a suspected counterfeit part?
Follow the applicable procedure for quarantine and preservation of evidence. Decisions about notification, return, database reporting and disposition depend on authority, contract, law, eligibility and evidence status.

